Elmo Costume

A Level Sensor is used to manage and observe the level of fluids in an apparatus or tank. It becomes necessary to manage the level of fluids in the containers to prevent overflow which may result in damage or filth. There are many different kinds of level sensors which use microwaves, optical interfaces, capacitances and ultrasonics and many other types of technologies to maintain levels. A level sensor can have various applications. Some of them are listed below for your reference. A level sensor can be used in splashpads and spray grounds, pools and spas and also fountains and water features. At times, it can get really irritating to manage the level of water on a spray ground. Therefore, it can be really advantageous to get a level sensor installed in the tank of a spray ground that can let you control three different levels at the same time and also makes the entire process seem very easy. The three different levels are:- high water level, alternate level and operating level. Operating level filters the water and is also responsible for recirculation. Alternate level senses the water in a tank and makes sure that it doesn’t overflow. The high water level allows drainage of the excess waste water that remains in the system. Fountains need more accurate control of water level because of their critical needs. Those needs include proper water circulation, protection of pump and preservation of chemical balance. If the above three needs are taken care of, there is a notable increase in the performance of the system as a result of proper water level using a level sensor. Installing a level sensor also helps against dry run problem that is caused when a motor runs and there is shortage of water in the tanks. A level sensor helps avoid the problem as the pumps are automatically switched off in case of low water level. Pool and spas need proper circulation of filtered warm water on a continuous basis, therefore installing a level sensor is advisable.